• Wi-Fi, Push Data, USB client & host
• Ultra-thin design
• Stable operation under strong light source
• Infrared auto-turning on function to save power
• Quick recognition of dry, wet and rough fingers
• Build-in SSR Excel software, Shift and Report management

Learn More

• Long Reading Distance
• IP66 Protect Level
• Access Control Function
• Supports ZKAccess3.5 & ZKBioSecurity3.0 software

Learn More

Safety and User-Orientated Design • Drop arm designed for emergency purpose • No exposed screws, safer for the user. • Smooth operation designed for mas transit application • The pictogram on the device indicating access permission and direction of movement • Special designed case shape, user-friendly for passenger to punch card or finger. • Anti-tailgate

Easy Integration • Flexible reader installation plate. Customers can easily integrate with third party redaer • Standard electrical interface for third party device. • By using compact mechanism, the turnstile has more space inside for integration • ZKTeco provides integration service in factory, with board and peripherals installed, ensuring compliance of the system. When the turnstile is delivered, just plug it in and do the setting. Save the cost of installation.

Learn More

• Built-in 7600 mAh backup battery extends extra operation time
• Communication via GPRS, TCP/IP, USB-host and optional with Wi-Fi/3G
• IP65 rated water-proof and dust-proof protection grade
• Shockproof (1m above the ground)
• Rubber coated protection
• Convenient carry case design
• 50,000 Fingerprint Capacity
• 50,000 Card Capacity

Learn More

• 2.0-inch color display with graphical UI for easy operation
• Up to 24 user-defined schedules that can be activated on a daily bell alert
• Prompt audio acceptance or rejection signals for valid or invalid cards
• TCP/IP or RS485 communication for various networking environments
• Supports USB flash drive for offline data management
• Built-in auxiliary input with enhanced flexibility to link with wired detector or emergency switch
• Multi-verification methods to enhance security level
• Standard access control features such as Time zone, Holiday, A&C Group, Unlock combination etc
• Duress Alarm offers effective protection against duress by threats
• Tamper Proof Switch and multiple alarm outputs
• Multi-languages

Learn More

• Wiegand output 34bit
• Ability to read within 50-90 cm depending on card type.
• Read Mifare cards 13.56MHz.
• Size 75mm x 116mm x 16mm.
• ONE-YEAR WARRANTY.

Learn More

• KR100M - 13.56MHz Mifare card reader
• Read Range - KR100M - Up to 5CM
• Reading Time (Card) - ≤300ms

Learn More

• Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
• Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
• Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
• Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
• Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
• Easy-to-use and intuitive programming with ZKAccess Software
• System management by browser from client PC’s. No need to install software on each client
• Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
• Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
• Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.

Learn More

• Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
• Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
• Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
• Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
• Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
• Easy-to-use and intuitive programming with ZKAccess Software
• System management by browser from client PC’s. No need to install software on each client
• Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
• Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
• Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.

Learn More

• Modern Design & Interactive UI
• Revolutionary SilkID Fingerprint Sensor
• Simple Management & Scalability
• Multiple Verification Modes: Face / Fingerprint / Card / Password
• Outstanding Performance With Dry, Wet and Rough Fingers
• Optional POE

Learn More

• 1, 200 face and 2,000 fingerprint templates
• Multi-language
• High verification speed
• Advanced and user-friendly UI
• Optional built-in battery backup, providing approximately 4 hours of continuous operation
• New Framework firmware, easy to extend functions and customize client’s requirements
• One face template is registered for one user only
• Able to detect whether the face is an actual face or a photo, enhancing the security level of verification

Learn More

• Multi-biometric fast verification
• Stable operation under strong light source
• Infrared auto-turning on function to save power
• Quick recognition of dry, wet and rough fingers
• Multi-language supported
• Built-in 2000mAh backup battery to extend operation time
• Prevents duplicated face registration and supports fake face detection function

Learn More

• Fingerprint, face, RFID and password 4 type verification mode
• High-speed identification less than 1 second
• TCP/IP Port for Internet connection
• Access Port available to control one lock and exit button
• Optional 5V 1900mAH UPS, standby up to 3 hours

Learn More

• Lock Out Mode : All normal users (other than admin) will be locked out;
• Voice Guide Programming : Easy to program,support Portuguese, Spanish, English;
• Volume Adjustment : include high volume, low volume and silent mode;
• BLE 4.0 : Unlock your door using dedicated mobile App on your smart phone;
• Random Password : Anti- peep design, enhanced code security;
• Alarm Mode : Low battery warning & illegal operation warning;
• 30mm Thinness : Support super thinness of 30 mm;
• Reversible Handle Design : To fit for all door open direction;
• Back Up Power : Emergency battery port of 9V;

Learn More

• 2.8-inch touch screen, color display with graphical UI for easy operation
• Up to 24 user-defined schedules that can be activated on a daily bell alert (optional)
• Prompt audio acceptance or rejection signals for valid or invalid fingers
• Compact and lightweight, small size for 86mm (L) x 86mm (H) socket installation
• TCP/IP or RS485 communication for various networking environments
• Supports USB flash drive for offline data management
• Built-in auxiliary input with enhanced flexibility to link with wired detector or emergency switch
• Up to 15 multi-verification methods to enhance security level
• Standard access control features such as Time zone, Holiday, A&C Group, Unlock combination etc.
• Duress Alarm offers effective protection against duress by threats
• Tamper proof switch and multiple alarm outputs
• Multi-languages customizable

Learn More